Alex Where is Factory Act applicable?
The Act is applicable to any factory whereon ten or more workers are working, or were working on any day of the preceding twelve months, and in any part of which a manufacturing process is being carried on with the aid of power, or is ordinarily so carried on, or whereon twenty or more workers are working, or were …
What are the 5 main components of good manufacturing practice?
To simplify this, GMP helps to ensure the consistent quality and safety of products by focusing attention on five key elements, which are often referred to as the 5 P’s of GMP—people, premises, processes, products and procedures (or paperwork).
How many sections are in the Factories Act?
Factories Act 1948
| Sections | Title |
|---|---|
| 5 | Factories or two or more factories to be a single factory |
| 6 | Power to exempt during public emergency |
| 7 | Approval, licensing and registration of factories |
| a. General duties of the occupier |
What are the important provisions in the Factories Act?
The Factories Act, 1948 contains the following provisions relating to Labour Welfare:
- (1) Washing Facilities: ADVERTISEMENTS:
- (2) Facilities for storing and drying clothing:
- (3) Facilities for sitting:
- (4) First aid appliances:
- (5) Canteens:
- (6) Shelters, rest rooms and lunch rooms:
- (7) Creches:
- (8) Welfare officers:
Who comes under Factory Act?
The Act is applicable to any factory using power & employing 10 or more workers and if not using power, employing 20 or more workers on any day of the preceding twelve months, and in any part of which a manufacturing process is being carried on with the aid of power, or is ordinarily so carried on, or whereon twenty or …
Who is liable for most violations under Factories Act?
This section states that in case there is any kind of contravention with the laws of the Act, then the occupier and the manager of the factory will be equally responsible for the breaking of the law. They will be punishable for with imprisonment upto 2 years and fine upto Rs. 2 lakhs.
What is the golden rule of GMP?
Golden Rule#1 Get the facility design right from the start. Golden Rule#2 Validate processes. Golden Rule#3 Write good procedures and follow them. Golden Rule#4 Identify who does what.
What is the difference between GMP and ISO?
GMP is a product quality standard, with a focus on getting the right quality product to the only customer of GMP – the patient. Whilst GMP focuses on Production and Quality Control – ISO focuses on the all departments and processes of an organisation.
Who comes under Factories Act?
What is Factory Act Licence?
Factory License acts as an approval document provided by authorities to carry out manufacturing activities. The Factories Act 1948 states that a factory must obtain approval from the labor and employment department for its building plan before it covers itself for registration of a factory.
What are the features of Factories Act?
The factories should have adequate lighting, drainage system, temperature, ventilation etc. The arrangement for drinking water must be made. Also, urinals and sufficient latrine spaces should be provided at convenient places. These places must be kept clean and accessible by the workers.
Is the Factories Act still in force?
It was replaced by the Occupational Safety, Health and Working Conditions Code, 2020. The Act is administered by the Ministry of Labour and Employment in India through its Directorate General Factory Advice Service & Labour Institutes (DGFASLI) and by the State Governments through their factory inspectorates.
Are there any work stations that are not ADA compliant?
Individual employee work stations, such as a grocery checkout counter or an automobile service bay designed for use by one person, do not contain common use circulation paths and are not required to comply.
How many floors are required for a food premises?
10 Floors (1) Floors must be designed and constructed in a way that is appropriate for the activities conducted on the food premises. (2) Subject to subclause (3), floors must: (a) be able to be effectively cleaned; (b) be unable to absorb grease, food particles or water;
What are the requirements for a mezzanine floor?
Section 505 of the International Building Code specifies the requirements for two types of elevated floor areas. These elevated floors are known as mezzanines and equipment platforms. Each is unique when it comes to their code requirements, but in this post we will discuss the mezzanine code requirements found in Section 505.2.
What’s the best way to organize a factory?
Organising these areas can help boost productivity for everyone within your business, making it well worth the effort. Schedule a regular date for a deep clean of your warehouse or factory. Designate each employee an area they’re responsible for giving a thorough clean from top to bottom.
What are the requirements of the Factories Act?
Cleanliness– Every factory must be clean and there should be no accumulation of dirt. Floor, windows, passage, benches of workrooms, staircase etc. should be cleaned on a regular basis with disinfectant. Disposal of wastes and effluents– the factory shall have proper arrangements for the treatment of wastes and effluents.
Which is the main objective of factory Compliance Act?
The main objective of this act is not only to ensure adequate safety measures but also to promote the health and welfare of the labours working in factories. Hence, the statutory factory compliance audit is conducted in factories to regulate the safety, health, licensing, working hours, annual leave, minimum wages, and so on.
What do you need to know about garment factory compliance?
Workmen Workers Committee Meeting File (with Circular, Agenda, Minutes, etc.) Health and Safety Workers Committee Meeting File (with Circular, Agenda, Minutes, etc.) Canteen Workers Committee Meeting File (with Circular, Agenda, Minutes, etc.) d. Card to All A. Securities UniForm Compliance /Cap/Shoe/Belt etc. MSDS for apropriate place. B.
What do you need to know about factory safety?
Maintenance of Building– The building of the factory should be maintained properly so that it does not cause any injury to the health of the workers. Appointment of Safety Officer– In a factory, where the number of employers is more than 1000 than the factory is required to appoint a safety officer.